Titan Fitness T-2 Series Power Rack

The T-2 Series Power Rack stands 83 inches tall, so you will need at least 7 feet of vertical clearance. It is designed specifically for home and garage gyms, but be sure to measure your ceiling height before purchasing to ensure you have enough room for the pull-up bar.

This rack uses a 2x2-inch steel tube design with 26mm hole spacing. While many standard 2x2 attachments will fit, you should verify that the attachment is specifically compatible with 26mm holes to ensure a secure and safe fit.

The T-2 Series is designed with a wide footprint that provides excellent stability for most lifts. However, for maximum safety—especially if you are performing kipping pull-ups or using heavy weights—we strongly recommend bolting the unit to the floor or using a weight storage solution to anchor it.

The rackable capacity of 850 lb refers to the maximum weight you can safely place on the J-hooks or safeties during a lift. The 2,200 lb whole rack capacity represents the structural integrity of the entire steel frame, indicating the total load the system can support.

The rack includes the essential components to get started, such as adjustable J-hooks, pin-and-pipe safeties, and a pull-up bar. You will need to provide your own barbell, weight plates, and a bench to complete your setup.

Assembly is straightforward but requires two people to safely manage the steel uprights. You will need basic tools like a wrench and socket set, and it typically takes about an hour to fully assemble and tighten all hardware.