Titan Fitness T-3 Series Power Rack

While the rack includes bolt-down options for maximum stability, it is designed as a bolt-together unit. We strongly recommend bolting it to the floor, especially if you plan on doing kipping pull-ups or using heavy bands, to ensure complete safety during your lifts.

Westside hole spacing features 1-inch increments through the bench press zone, allowing you to fine-tune your J-hook height for a safer lift-off. The standard 2-inch spacing is used above and below this zone, which is sufficient for squatting and other standing exercises.

The T-3 Series is highly modular and compatible with most Titan Power Rack accessories designed for 2x3-inch uprights. Always double-check the specific accessory listing to confirm it is compatible with the T-3 series before purchasing.

A 24-inch depth is excellent for space-saving home gyms and is perfectly adequate for squats, overhead presses, and pull-ups. If you plan on doing more dynamic movements inside the rack, such as heavy cleans or complex barbell work, you might prefer the 36-inch depth for extra clearance.

Yes, the rack includes the necessary assembly hardware, two reinforced J-hooks, and both a 1.25-inch and a 2-inch pull-up bar. You will need to provide your own barbell, weight plates, and a bench to complete your setup.

The bolt-together design is straightforward, but because of the weight and size of the steel components, we recommend having two people for assembly. Expect to spend about an hour or two getting everything tightened and leveled correctly.